Silvertail A0 Laser Cutter/Upgrade Notes: Difference between revisions
From London Hackspace Wiki
(make a start on the differences documentation) |
|||
| Line 10: | Line 10: | ||
* Z axis adjustment is via software on the PC, choose a smallish step size and keep pressing the up/down z axis buttons. Little steps take it easy! | * Z axis adjustment is via software on the PC, choose a smallish step size and keep pressing the up/down z axis buttons. Little steps take it easy! | ||
* [https://lightburnsoftware.com/pages/tutorials Lightburn tutorials] | * [https://lightburnsoftware.com/pages/tutorials Lightburn tutorials] | ||
* If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it. | |||
[[Silvertail A0 Laser Cutter/Upgrade Notes from HPC to stock Silvertail]] | [[Silvertail A0 Laser Cutter/Upgrade Notes from HPC to stock Silvertail]] | ||
Revision as of 20:52, 24 February 2020
Work-in-progress.
Differences between stock Silvertail lasercutter with Lasercut53 software and current lasercutter set-up with smoothiware controller and Lightburn software
- No need to download to the cutter
- The equivalent of 'Run Box' to get the extent of your cut is the 'Frame' button.
- Ignore the controls on the cutter itself. The LCD panel currently does nothing.
- Z axis adjustment is via software on the PC, choose a smallish step size and keep pressing the up/down z axis buttons. Little steps take it easy!
- Lightburn tutorials
- If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it.
Silvertail A0 Laser Cutter/Upgrade Notes from HPC to stock Silvertail
