Prusa/Parts List

Bill of Materials

This is the list of the ingredients that are necessary to build the Hackspace Prusa.

The original design uses a couple of smooth rods for the Y-axis, but we've used some angle-iron, and a couple of desk-drawer slides. It's a womble-ish solution... ;00

If you want to provide the parts that we don't have yet, add your name to the volunteer section for the part, and go for it. There are links to the order pages for a couple of supplier's websites, but if you find one that we haven't looked at yet, then add them in.

If a part doesn't have a name attached, then it's one that we still need..

Printed Parts

Quantity	Description	Type	Diagram	Volunteer
2	Coupling	Nophead's Z Coupling:	Picture Link	Billy
3	endstop-holder	RP	Picture Link
1	x-carriage	RP	Picture Link	Billy
1	x-end-idler	RP	Picture Link	Billy
1	x-end-motor	RP	Picture Link	Billy
1	y-motor-bracket	RP	Picture Link	Billy
2	z-motor-mount	RP	Picture Link	Billy
4	belt-clamp	RP	Picture Link	Billy
8	bar-clamp	RP	Picture Link	Billy
2	rod-clamp	RP	Picture Link	Billy
2	pulley	RP	Picture Link
4	frame-vertex with foot	RP	Picture Link	Billy
2	frame-vertex	RP	Picture Link	Billy
12	pla-bushing	RP-PLA	Picture Link	We may not need all 12.

---