Project:Tool Access Control/Deployment
From London Hackspace Wiki
This page is for keeping track of what we need to achieve, and how far along we are to achieving it.
Tools
| Name | Location | Maintainers | Number of Phases | Maximum current draw | ACNode fitting Location | Status |
|---|---|---|---|---|---|---|
| Lulzbot | 3D Printer Corner | Thomas Greer | 1 | 5A | Inside the base | In Service |
| Myford lathe | General workshop | Liam, AndyT | 1, | 13A max SSR | Toughened acnode | Installed |
| Lasercutter | By the Window | Sol, Henry | 1 | Very little (interlock) | On the side | In Service |
| Shapeoko | Robotics/CNC area | mentar, yopero, chris77uk | 1 | Very little, uses ATX PSU for 12V power | Inside electronics container | Installed |
| Stratasys | 3D printer area | hipster | 1 | 13A max mains relay | Inside top compartment | Installed |
| Wadkins Table Saw | Woodworkshop | Dean and wood crew as per wiki | 3 | 13A max mains relay | Inside top compartment | Installed |
| TIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | In Service |
| MIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Needs wireless solution | Proposed |
| Grinding wheel 1 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | Proposed |
| Grinding wheel 2 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | Proposed |
| Donkey saw | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | Proposed |
| Grinder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | Proposed |
Items in stock
3x Connected Launchpads 3x 40A SSRs 3x RFID Readers 0x RGB LED arcade buttons
