SwapShop

If you have anything you no longer want, list it here, either for free, swap or sale. You can also list the things you want.

Aden

Sale or Swap

DVB-C to firewire thingy
DVB-S card

Free

A couple of tivos (claimed by glen)

Jonty

Sale or swap

2x PCI DVB-T cards

Free

A Dyson DC-16 handheld vacuum, with a knackered battery and no charger. Or tools.

Wants

High-res webcams, preferably > 30fps (PS2 / PS3 cam would be great)
Lasers, of any type
A working DVD player (Offers from Dom and Muz recieved)
A crappy electric drill, at least 18V

JamesHarrison

Sale or Swap

Misc servers, no disks, Celeron/P4-era, dodgy cases, not proper server-grade things
48U Dell full-depth rack, casters, a bit scruffy and a bust lock on side panel (no keys for the front panel lock) but otherwise decent condition, collection only

Wants

Fibre networking gear (FC HBAs, NICs, switches, disk arrays)
Storage equipment - old NAS boxes, tape drives, etc (nothing under 100Gb unless it's something like a 73GB/10kRPM FC/SCSI disk)
RC/flight gear (transmitters, receivers, motors, props, ESCs)
Hot air rework/temperature controlled soldering iron

Artag

Free

C/Port and C/Dock for Dell C600 etc. laptops
Digital BC17F-10 cable for RL01/02

Sale or swap

3 Motorola XTN446 radios with drop-in chargers. As new.
Datron 1051 DVM and 1220 scanner (IEEE-488)
Small environmental chamber (heat, cold, but not humidity) ~50l capacity

Wants

Broken Eee PC for spares, or just an Eee PC 4G (701) keyboard.
Electronics testgear, working or not
Old calculators, especially hewlett packard
A job (but not too soon)

Loan

Various stuff that I could bring to the space by arrangement, for temporary use (some of these are heavy and most would require a car trip so not trivial):

Testgear - signal generators, DVMs, counters, oscilloscopes, logic analysers, spectrum analysers, LCR measurement, PSUs, current probes etc. Ask if you're looking for something.

Mechanical - sheet folder, toggle press, die filer, linisher, power hacksaw, grinding vice, scrollsaws, MIG welder, PCB tank, forge/brazing hearth, bar cropper.

Joe/ascenseur

Free

Motic Manual Microscope (mirror light source)
A CD Drive

Sale or Swap

Wasp CCD Barcode Scanner (PS/2)

Wants/Would-Likes

IDE DVD Drive

Jim/srimech

Free

Lots of pneumatic gear - 3x 50mm bore 300mm stroke 10 bar cylinders, lots of smaller cylinders, solenoid 3-port valves, 2 carbon dioxide fire extinguishers, 10 bar regulator, 11 bar and 68 bar relief valves, 2l 16 bar buffer tank. None certified/tested, used at collector's risk!
2 channel 40MHz radio control transmitter, receivers and servos

Wants

Revolution counter, the small kind you find in tape recorders.
Model steam engine, Mamod or similar