Equipment/The Beast
This is the big arcade machine that lurks in the space.
| "The Beast" arcade machine | |
|---|---|
 | |
| Model | Unknown |
| Sub-category | Audio/Visual |
| Status | Good working order |
| Consumables | Unknown |
| Accessories | Unknown |
| Training requirement | no |
| Training link | Unknown |
| ACnode | no |
| Owner | Unknown |
| Origin | Unknown |
| Location | Ground floor, ?A?, in front of the laser cutter |
It has MAME and a large amount of ROMs, with a relatively easy to use front-end.
It runs Windows (sad face) for perfectly sensible reasons.
Current state
TL;DR
The machine is currently operational, turn on the wall socket switch in the hall path and give it a go! Report to the mailinglist when something breaks down, or contact user:Yvanj
Elaborated version
The machine currently consist out of a Dell i5 desktop running Windows 7.
It has the following software installed:
- TeamViewer (for remote hands, or, hands next to it without digging for a KB/mouse)
- MaLa frontend [[1]]
- MAME [[2]]
- Windows 7
- Google Chrome
A connected keyboard has been hidden behind the coin door for emergency purposes; the cable should be long enough to pull it and use it.
The hardware is fully working now, however:
- It has a cheap crappy PC speaker ruining gameplay
- We don't have enough inputs to use all of the options in the menu system :sadface:
Log
All the control have been replaced, rewired and confirmed working, the side art has been trimmed and cleaned and mame has been installed, the bezel for the monitor has been sprayed black along with the metal trim around the edge of the marquee. 2 locks need replacing and a power button for the shuttle PC needs adding. --YetiFiasco 21/10/2013
New speakers have been fabricated and installed from the google TV speakers, the CRT has been replaced with an LCD mounted to the original board in its original position (upright), still needs aligning properly, given a general tidy. Both joysticks need replacing at ~£30 due to tape being applied instead of the proper collet fouling the dip switches, buttons could be replaced at the same time, wiring also needs replacing, lots of brittle wire and loose connectors. --YetiFiassco 18/08/2013
The flouro light behind the perspex up top is now running, but needs re-wiring properly to be safe. Top taken off and the last vestiges of the broken speaker system removed. Cleaned a bit more.. --TimRTerrible 13/08/2013
The logitech 2.1 system that is installed in the cabinet has a busted amp/sub unit. The satellites work (just) but are naff without amplification. Have installed the old Google TV speakers temporarily, removing the old ones will involve taking the cabinet apart. One of the (mains!) cables that feeds the neons has been yanked out and is hanging loose. Unplugged. Fixing this will involve taking the cabinet apart, too. Tidied all the cables in the back, removed unused stuff. Currently running by the hackspace front door for opening evening. --TimRTerrible 13/08/2013
Updated the Wiki page with the current situation --Yvanj (talk) 21:41, 20 March 2015 (UTC)
Outings 2012
- The Wild Rumpus Thursday, 2nd of February at 93 feet east. 18:30-23:00.
- Bit of Alright: Indie focused game design conference at the BAC. 3rd of Feb. 25ukp.
- GameJam at LSBU 4-5th February.
