Equipment/HPC LS3060 Laser Cutter/LogBook

Logbook

15/09/2010 Operator Russ

• Cut some 1.5mm neoprene fairly successfully - needs high power and it's a bit smelly. (Settings in the book.)
• Circle issue is fixed. It was a problem with the tension on the frontmost X drive belt.
• Did some awesome etching onto black anodised aluminium - 450mm/sec, 90% power.

13/09/2010 Operator: samthetechie

Todo: Test CorelDraw X3 with 20mm circles on paper and compare to test using LaserCutter Software

12/09/2010 Operator: samthetechie

• Setup CorelDraw X3 with LaserCutter Add-on Toolbar.
• Cut Mic On Sign 3mm Perspex.
• Cut MusicMetric Sign 6mm MDF.