Hackspace Move/Cremer Restoration
This is a list of things that need to be fixed or restored once we leave Cremer st. Please add anything you can think of, they will be struck off once we have confirmation that the work doesn't need to be done, or is completed.
I see a red door and I want to paint it black...
We need a door for the loo. The red door that was rescued from junking is now in the workshop, between the member box shelves and the machine tools, up against the wall. The holes have been patched and it's sanded. It needs to be painted, first with grey undercoat, and let to dry, second with black gloss. This will take a while because you can only paint one side at a time. I recommend using two sawhorses, and probably take it outside if it's nice out.
Paints for this are in one of the two bags stored on the last row of member box shelves in bags marked "for cremer restoration / do not use". There should be a clean brush soaking in the water in the shower room.
Things to keep in mind:
- Clean off the brushes and close the paint tins after each coat and when finished! This paint should be quite easy to take off.
- If you don't finish, update here with the time of the last coat so somebody else can pick up where you took off.
- Don't forget the edges of the door!
Volunteer
Specialist:
chauffeur | tgreer | to help transport tools and building materials on saturday 11am-1pm |
doorbot fixer | member x | to re-enable doorbot at cremer street so people can get in and out. |
General labour:
- aaron - all weekend 20-21
- Will beaufoy - sunday
Supplies
The various supplies that have been bought and stored at the hackspace are on the last row of member box shelves in plastic bags with labels on them.
Cleaning | ||
---|---|---|
buckets | from hackspace | 3 at least, as many as we can get |
rags | from hackspace | infinity |
henry | already at cremer | 1 |
paint scraper | from hackspace | 1 |
power sander + sandpaper | from hackspace | 1 |
bins for transporting tools | from hackspace | 3 |
Fixing holes in walls | ||
screwdrivers | from hackspace | 2 posidriv, 1 phillips, 1 slotted |
grippers | from hackspace | 3 |
putty knives | from hackspace | 3 |
pollyfilla | bought | 1 bucket (may need more) |
work gloves | from hackspace | 3 pairs |
Painting | ||
brushes | from hackspace, if clean / to buy | 3 total |
roller frames | from hackspace | 2 |
rollers | to buy | 2 |
trays | to buy | 1 |
coveralls | from hackspace | as many as we can borrow |
white emulsion paint | from space | 2 huge buckets, to start |
grey undercoat | bought | 1 litre |
black gloss | bought | 1 litre |
mineral spirits | from hackspace / to buy | 1 jug (litre?) |
rubber gloves | from hackspace / to buy | 2 pairs |
Rebuilding loo door | ||
door itself | at hackspace | stored in workshop against wall between member boxes and machine tools. |
Wood | to buy |
|
Pane of wavy/frosted glass | to buy | ? NxM |
Drill | already at cremer | 1 |
forstner bit set | from hackspace | 1 |
wood screws | from hackspace | various sizes |
tape measure | from hackspace | 1 |
1/2" or 3/4" chisel | from hackspace | 1 |
level | from hackspace | 1 |
wood saw | from hackspace | 1 |
sawhorses | from hackspace | 2 |
hammer drill | from hackspace | 1 |
masonry drill set | from hackspace | 1 |
masonry screws | from hackspace / to buy | a bunch |
wood plane | from hackspace | 1 |
Reinstalling loo window | ||
pane of Georgian wired glass | to buy | NxM |
glass sealant | bought | 1 canister |
sandpaper | from hackspace | various |
caulking gun | from hackspace | 1 |
Masonry (if we do it ourselves) -- we want type N mortar (1 part portlant cement, 1 part lime, 6 parts sand) | ||
breeze blocks (440 x 215 x 100mm, low density should be ok) | to buy from MP Building Supplies | 54 |
contractor's (flat) shovel | to buy | 1 |
sheet of wood (for mortar) | from space | 1 |
bricklaying trowel | to buy | 1 |
cold chisel | from space | 1 |
lump hammer | from space | 1 |
brick jointer | to buy | 1, |
portland cement | to buy | 2 x 25kg bags |
aggregate | to buy | 5 x 25kg bags |
plasticiser | cursory search at cremer, otherwise to buy | 24 ml |
Fixing holes in front door | ||
wall filler | bought | 1 small tin |
Removing Kitchen | ||
tools already included | ||
Plumbing | ||
adjustable spanner | from hackspace | 1 |
??? | ||
Fixing holes in front door | ||
scrap wood | from space | several pieces |
wood saw | from space | 1 |
drill | already at cremer | 1 |
wood drill set | from hackspace | 1 |
screwdriver bit | from hackspace | assortment |
wood screws | from hackspace | various |
Misc | ||
hammer | from space | 1 |
scrap lumber | from space | several pieces |
short ladder | from space | 1 |
newspapers or plastic sheeting | from space | 1 |
Prep still to do
Checklist for weekend 20-21
- Gather everything we can from Cremer street in wee hours of morning.
- Bring cleaning supplies and basic tools to Cremer so people can start.
- Load everything else in van with tgreer and bring to Cremer.
- Pick up new supplies and bring to Cremer -- MP building suppliers and Jewsons (if necessary)
- Cleaning
- Clean walls
- Clean sinks
- Repair holes in walls
- Painting red door black
- see above
- Wetroom
- Remove sink and plumbing
- Remove benches
- Install toilet (and bathroom sink?) and new plumbing.
- Install partition wall and door
- DON'T FORGET LUNCH
- Masonry -- wetroom first
- ??? be very careful! get everything sorted before mixing mortar
- General painting -- AFTER WETROOM DONE
- Paint walls and entrance door
- Paint partition wall
Checklist for weekend 27-28
- Remove doorbot and repair holes in door
Water Stopcock locations
In unit 23, in the corner where the member boxes were. In unit 24, in cupboard next to the toilet.
Toilets
- Paint all walls white in toilets.
- Paint toilet doors black.
- biolab/darkroom - Remove sink and shelving/work surface, restore partition (and door ?), and replace loo and basin that have been removed and stored.
Unit 24
- Repair holes in front door/remove camera from spy hole and outside door.
- Restore connecting wall to 23.
- Replace kitchen sink in original location, which was under the laptop bar: on the right as you walk into the main room of 24.
- Remove everything else in kitchen.
- Remove waste pipe to 23.
- Wash concrete block walls, fill holes, and paint where necessary.
- Collect decorative electrical panels -
one by front door, possibly one by kitchen door.
Unit 23
- Fit new glass where extraction for lasercutter is currently.
- Fill in hole where the duct comes through the wall from the workshop.
- Wash concrete block walls, fill holes, and paint where necessary.
Outside
- Sweep balconies for any items.
Measurements
- Size of breeze blocks: 440 x 215 x 100mm
- inter-unit doorway approx size: 1170 x 2240mm
- new door to be installed in loo: 686 x 1981mm
- height of ceiling in loo -- to be measured (may be uneven)
- approx area to brick up in loo: 1000 x 2700mm
- door frame timber: 50x100mm
- external loo window to fix: 854mm x 232 mm -- someone should double-check before ordering
Suppliers
MP Building Supplies 282 Cambridge Heath Road, Bethnal Green London, E2 9DA 020 7729 1699 Open: Mon: 07:00 - 17:00 Tue: 07:00 - 17:00 Wed: 07:00 - 17:00 Thu: 07:00 - 17:00 Fri: 07:00 - 17:00 Sat: 08:00 - 14:00