CL1 BSO SOP GLP
CL1, BSO, SOP, GLP .. regulations and notification process
The purpose here is to take all the previous info regarding CL1, biolab health & safety, GLP guides and biolab protocols etc and boil it down into documentation suitable to support our CL1 notification.
It may seem wordy etc, but that's the nature of these regs in general and is part of the process. Not only will we be confident in our application but we also make the biolab at the hackspace safe and accessible for those wanting to work on bio projects.
Things to do:
1) Lab risk assessment (see below)
2) SOPs for lab activities (in the context of reduction of risk)
2a) Induction procedure for new biolab people
3) Risk assessments for new biolab projects and the formation of biosafety/GM committee, enactment of BSO
London Hackspace BioLab Risk Assessment
Laboratory Access Control
A suitable system is in place to control the access to the laboratory area within the building in order to ensure that only trained and responsible individuals can make use of the laboratory facilities of which this risk assessment is primarily concerned. Training consists firstly of a process of induction laid out in the LBL Standard Operating Procedures (SOPs) and further requires that users of the lab have considered the health and safety implications of the work to be carried out, given the organisms, reagents, procedures and skill level required. The Biological Safety Officer (BSO) and Biological Safety and Genetic Modification Safety (where relevant) Committees should be be informed of the nature of the work any users of the laboratory wish to undertake. Full details of the requirements of of principal investigators can also be found in the SOPs.
PPE, Biosafety and Contamination Risks
The biological organisms for which work will be carried out within the laboratory include
i) non-pathogenic strains of E. coli (such as DH5 alpha),
ii) cellulose producing gram-negative bacteria such as Gluconacetobacter,
iii) non-toxic Dinoflagelates,
iv) brewer’s yeast (Saccharomices cereviscae) and,
v) algal microorganisms from non-toxic environmental samples.
None of organisms for which the laboratory is being used to study require containment level (CL) precautions above that of CL1.
Those which fall into the classification of CL1 requirements include only those strains genetically modified by transformation. In particular, the transformation of E. coli by heat shock method and of Gluconacetobacter by electroporation. Both of these procedures are explained in the SOPs.
Personal Protective Equipment (PPE) suitable for working with these kinds of organisms is provided and consists of lab coats, goggles and gloves. If suitable PPE is not available to hand the BSO should be informed immediately before commencing any practical work.
To ensure that any contamination of genetically modified biomaterial and microorganisms does not occur, laboratory users should be aware of the correct handling and disposal procedures required. They should be made aware of typical requirements during laboratory safety induction and this knowledge should be reinforced during individual project risk assessments. Generally, all microorganisms should be handled while using gloves, eye protection and protective clothing to prevent material coming into contact with the user’s skin or eyes. This is both to protect the user and to eliminate the risk of transporting biomaterial out of the laboratory after work is completed. Gloves can be disposed of in the bins provided. Containment level 1 biomaterial should be deactivated before disposal by autoclaving and immersion in bleach in the ‘kill bin’ underneath the sink. The deactivated waste in the kill bin can then be diluted further and disposed of down the drain
Microwave
The microwave is a familiar device to probably all laboratory users and the standard precautions apply when using it. In particular, the handling of hot liquids and glassware may present the risk of burns and as such thermally resistant gloves are provided. Of note is also the fact that one of the primary uses of the microwave is heating of agarose for the casting of electrophoresis gels. User’s should be aware that previous, possibly less careful, operators may have used the microwave in conjunction with hazardous chemicals (as described later) and as such operation of the microwave using gloves is recommended in any case.
Spectrophotometer
The spectrophotometer is a device that measure the absorbance of a given liquid sample at various wavelengths. A full description of it’s usage is given in the SOPs. User’s should be aware that this system can generate light of significant intensity in both ultraviolet and infrared wavelengths. While most of the optical path and the bulbs required to generate this light is contained within the system, the user may come into contact with this in the sample measurement compartment of the device. As such it should be operated only with the sample measurement comparment fully closed.
PCR Machine
The Polymerase Chain Reaction (PCR) machine, also known as a thermalcycler, is used to amplified specific sections of template DNA either for diagnostic or molecular cloning purposes. The heating block and underside lid of this machine will typically reach temperatures in the region of 95 to 100degC in a typical amplification program and caution should be exercised when placing and removing samples. Information regarding the current state of the machine including current program and temperature is displayed on the LCD on the front panel of this machine. Full information regarding the use and programming of the Techne thermal cycler can be found in the SOPs.
Electrophoresis Power Supply Unit
The Power Supply Unit (PSU) used to supply a current to the electrophoresis tank (described below) is capable of producing dangerously high voltages and currents. It is typically set to the levels required for DNA electrophoresis in 100mL 1 - 2% w/v agarose gels. Caution should be exercised when plugging in and handling electrodes. Use of a residual current device is recommended when using this or any other electrical device in the laboratory that may pose a risk to operators from electric shock.
Electrophoresis tank and Ethidium Bromide area
The electrophoresis tank is located within the electrophoresis/Ethidium Bromide area of the laboratory bench. It is advised any work carried out within this area is manipulated separately from any work done in other areas. Any consumables used when handling Ethidium Bromide such as gloves and tips should be disposed of before handling anything outside of this area to prevent contamination of the wider lab area with the potentially toxic chemicals used in DNA staining. Ideally separate pipettes should also be used for ethidium bromide work vs other work. A full description of how to set up and run agarose gels for DNA electrophoresis is described in the SOPs.
UV illuminator
Gel electrophoresis separates DNA by size within an electric field. Separation of varying sizes of DNA fragment within an agarose gel allows visualisation of the various sizes of DNA fragment contained within a sample when nucleic acid binding stains are used. The typical stain used is Ethidium Bromide which is a fluorophore that is excited within the UV spectrum (with excitation maxima under 300nm) and emission within the visible spectrum. This presents two main risks to the user: i) As a DNA intercalating agent Ethidium Bromide is potentially mutagenic and should never be allowed to come in contact with the user’s bare skin, this applies through the whole DNA electrophoresis procedure from gel preparation, through electrophoresis and then subsequent gel visualisation. This is therefore also carried out in the electrophoresis/ethidium bromide area of the laboratory bench. ii) UV light can be damaging to exposed surfaces of the body and in extreme circumstances or prolonged use lead to carcinomas or eyesight damage. It is therefore advisable that eye protection be used by all people present within the laboratory when UV gel visualisation is taking place and that any possible contact from UV radiation on the user’s body while manipulating and viewing their be minimised through adequate PPE and controlled use of the UV light source.
- UV GEL BOX NEEDS FIXING BEFORE AUDIT!!!!*******
HEPA flow cabinet/area
Hot plate/Steam cooker/steriliser/autoclave
Sink area
Chemicals and Storage
Incubator
Centrifuges
Refrigerators and Sample Storage
