Project:SgiO2

SgiO2
QR code

Notes

• Now has a hard drive (Taken from User:Jonty's box). It's 17GB.
  • Artag has donated a couple of hard disks.
• talk to it over the serial port, 9600 8N1 as usual.
• only 64Mb of ram :(
• Now has NetBSD 5.0.2 installed
• only wunr from the serial port.
• needs a PS2 keyboard and mouse
• during the move the psu for the screen has been sperated from the screen, if anyone knows where it is please say so!

system ARC SGI-IP32 key 0
  processor CPU MIPS-R5000 key 0
    processor FPU MIPS-R5000FPC key 0
    cache primary icache 32 Kbytes (block 1 lines, line 32 bytes)
    cache primary dcache 32 Kbytes (block 1 lines, line 32 bytes)
    cache secondary cache 512 Kbytes (block 1 lines, line 32 bytes)
    memory main 64 Mbytes
  controller display SGI-CRM, Rev C key 0
    peripheral monitor key 0
  controller network 110Base-TX revision 2 key 0
    peripheral network DP83840-1 key 0
  controller serial MACE-16550 key 0
    peripheral line key 0
  controller serial MACE-16550 key 1
    peripheral line key 0
  controller audio A3 key 1
  controller keyboard pckbd key 0
  controller pointer pcms key 0
  adapter PCI MACE-PCI key 0
    adapter SCSI ADP7880 key 0
      controller CDROM TOSHIBA CD-ROM XM-5701TA key 4
        peripheral disk unit 0
    adapter SCSI ADP7880 key 1

> printenv
AutoLoad=Yes
console=g
diskless=0
dbaud=9600
volume=80
sgilogo=y
TimeZone=PST8PDT
netaddr=132.185.128.150
monitor=h
cpufreq=180
eaddr=08:00:69:0c:78:a9
NoAutoLoad=CONSOLE OPEN FAILED.
ConsoleOut=serial(0)
ConsoleIn=serial(0)
> version


PROM Monitor (BE)
Mon Jul 28 17:27:40 PDT 1997 
VERSION 4.3
O2 R4600/R5000/R10000
IRIX 6.3 IP32prom IP32PROM-v4