Equipment/LHS Gantry CNC

From London Hackspace Wiki
< Equipment
Revision as of 02:41, 8 September 2015 by Matt9 (talk | contribs) (Created page with "{{EquipmentInfobox |name=Gantry CNC <!-- Name of the item. --> |image=GantryCNC.jpg <!-- Image of the item. Leave with placeholder image if none exists. --> |model=LHS Design...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Gantry CNC
GantryCNC.jpg
Model LHS Design
Sub-category CNC
Status Under construction
Consumables Router / Milling Cutters
Accessories NA
Training requirement Yes
ACnode Yes
Owner LHS
Origin LHS Built
Location Basement, Robotics area
Maintainers Robotics, Metalbashers

Specs

  • Spindle 1000 to 20000rpm
  • Rapid traverse rate at 100% 2000mm/min (78"/min)
  • Axis travel
    • X(longitudinal) 800mm
    • Y(cross) 960mm
    • Z(vertical) 80mm (Phase 1), 280mm (Phase 2)
Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Equipment/LHS_Gantry_CNC&oldid=47796’