Equipment/gf-coreswitch
< Equipment
Jump to navigation
Jump to search
Revision as of 14:55, 9 November 2019 by Mich181189 (talk | contribs) (initial configuration. This WILL change a lot over the next few hours.)
| coreswitch | |
|---|---|
 | |
| Model | Cisco Catalyst 2960-S |
| Sub-category | Networking |
| Status | Good working order |
| Accessories | Cat5 patch leads |
| Training requirement | no |
| Origin | Network Fairies |
| Location | the rack |
| Maintainers | sysadmin team |
This switch is the replacement core switch, as part of the great migration downstairs.
- 10.0.10.19 (gf-coreswitch.mgmt.london.hackspace.org.uk) (SSH)
- Core switch - connected to Boole and Landin
| Port(s) | Type | VLAN | Connected To |
|---|---|---|---|
| 1-4 | Gigabit Copper | trunk | Access Points |
| 5-28 | Gigabit Copper | Servers(70) | Wall Ports |
| 29-32 | Gigabit Copper | Trunk | Blanton LACP (port-channel 2 on switch) |
| 33-36 | Gigabit Copper | Trunk | Landin LACP (port-channel 1 on switch) |
| 37-48 | Gigabit Copper | Trunk | General Trunk Ports |