Difference between revisions of "Cremer st - Infrastructure/Kitchen Wiring"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
We have sockets and 2.5mm cable aplenty. | We have sockets and 2.5mm cable aplenty. | ||
| + | |||
| + | Phil's already done the ring main and water heater circuit, and a few sockets. [[User:Ms7821|Ms7821]] 09:28, 16 February 2012 (UTC) | ||
=== Planned === | === Planned === | ||
| − | * Distro box: 3x32A breakers, 1x16A breaker | + | * Distro box: 3x32A breakers, 1x16A breaker (6 way suggested, so 2xblank) |
* Cables: | * Cables: | ||
{| class="wikitable" | {| class="wikitable" | ||
! Purpose !! Power !! Gauge !! Length | ! Purpose !! Power !! Gauge !! Length | ||
|- | |- | ||
| − | | Distro || 100A || 16mm^2|| >>1m+14m+4m = | + | | Distro || 100A || 16mm^2|| >>1m+14m+4m = 26m |
|- | |- | ||
| Oven || 5kW (>>22A) || 4mm^2 || >>2m+2m = 5m | | Oven || 5kW (>>22A) || 4mm^2 || >>2m+2m = 5m | ||
| Line 16: | Line 18: | ||
| Hob || 6kW/6.6kW (>>29A) || 4mm^2 || >>2m+2m = 5m | | Hob || 6kW/6.6kW (>>29A) || 4mm^2 || >>2m+2m = 5m | ||
|- | |- | ||
| − | | Water heater || guess 3kW (13A) || 2.5mm^2 || >>2m = 3m | + | | <s>Water heater</s> || guess 3kW (13A) || 2.5mm^2 || <s>>>2m = 3m</s> |
|- | |- | ||
| − | | Ring main || || 2.5mm^2 || >>((2m+2.5m+2.5m)+(2m+2m))*2 = 25m | + | | <s>Ring main</s> || || 2.5mm^2 || <s>>>((2m+2.5m+2.5m)+(2m+2m))*2 = 25m</s> |
|} | |} | ||
| + | Upgrade diameters (4-6, 16-25) if not clipped to a masonry or wooden wall. | ||
| + | Phil suggests 18m for the 4mm | ||
| + | * 50xP-clips for 16mm | ||
| + | * 50xP-clips for 4mm | ||
| + | |||
| + | And to finish off the sockets: | ||
| + | * 5x Double dry lining boxes (25mm deep or more) | ||
| + | * 2x single dry lining boxes (any depth) | ||
| − | |||
=== Suggested suppliers=== | === Suggested suppliers=== | ||
Revision as of 09:28, 16 February 2012
People: Paddyd, Phil, Russ
We have sockets and 2.5mm cable aplenty.
Phil's already done the ring main and water heater circuit, and a few sockets. Ms7821 09:28, 16 February 2012 (UTC)
Planned
- Distro box: 3x32A breakers, 1x16A breaker (6 way suggested, so 2xblank)
- Cables:
| Purpose | Power | Gauge | Length |
|---|---|---|---|
| Distro | 100A | 16mm^2 | >>1m+14m+4m = 26m |
| Oven | 5kW (>>22A) | 4mm^2 | >>2m+2m = 5m |
| Hob | 6kW/6.6kW (>>29A) | 4mm^2 | >>2m+2m = 5m |
| guess 3kW (13A) | 2.5mm^2 | ||
| 2.5mm^2 |
Upgrade diameters (4-6, 16-25) if not clipped to a masonry or wooden wall. Phil suggests 18m for the 4mm
- 50xP-clips for 16mm
- 50xP-clips for 4mm
And to finish off the sockets:
- 5x Double dry lining boxes (25mm deep or more)
- 2x single dry lining boxes (any depth)
Suggested suppliers
- TLC-direct (cheap, but whole drum)
- ?
Back-up option
- 2x4mm runs, one for hob, one for oven
- Put boiler on a fused spur or do a separate 2.5/4mm run for that.