Equipment/1F-Floorports
< Equipment
Jump to navigation
Jump to search
Revision as of 17:34, 29 July 2018 by Mich181189 (talk | contribs) (Initial stab at documenting the floor port switches)
| 1f-floorports[1,2,3] | |
|---|---|
 | |
| Model | Cisco Catalyst 2960G |
| Sub-category | Networking |
| Status | Good working order |
| Accessories | Cat5 patch leads |
| Training requirement | no |
| Origin | Network Fairies |
| Location | first floor comms room |
| Maintainers |
sysadmin team Property "Name" (as page type) with input value "1f-floorports[1,2,3" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. |
- 10.0.10.11 (1f-floorports1.mgmt.london.hackspace.org.uk) (Telnet - will set up SSH at some point)
- 10.0.10.12 (1f-floorports2.mgmt.london.hackspace.org.uk) (Telnet - will set up SSH at some point)
- 10.0.10.13 (1f-floorports3.mgmt.london.hackspace.org.uk) (Telnet - will set up SSH at some point)
- Handle the numerous floor ports around the first floor
- Basically, everything except the last two ports is a floor port
1f-floorports1, 1f-floorports2
- 48 port switches
| Port(s) | Type | VLAN | Connected To |
|---|---|---|---|
| 1-44 | Gigabit Copper | FloorPorts(70) | General floor ports |
| 44-46 | Gigabit Copper or SFP | FloorPorts(70) | General floor ports |
| 46-48 | Gigabit Copper or SFP | Trunk | Uplink to Core Switch |
1f-floorports3
- 24 port switch
| Port(s) | Type | VLAN | Connected To |
|---|---|---|---|
| 1-20 | Gigabit Copper | FloorPorts(70) | General floor ports |
| 21-22 | Gigabit Copper or SFP | FloorPorts(70) | General floor ports |
| 23-24 | Gigabit Copper or SFP | Trunk | Uplink to Core Switch |