Difference between revisions of "Equipment/HPC LS3060 Laser Cutter"

From London Hackspace Wiki
Jump to navigation Jump to search
m
Line 1: Line 1:
 +
[[File:Laser cutter.png|right]]
 
==Status==
 
==Status==
 
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.
 
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.
[[File:Laser cutter.png]]
 
 
 
==Model==
 
==Model==
 
* [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter.
 
* [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter.

Revision as of 14:06, 19 August 2010

Laser cutter.png

Status

The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.

Model

  • HPC LS3060 "plus" laser engraver and cutter.

Instructions

*** Please don't touch or fiddle with the laser cutter unless you've had permission from either Russ or Jonty. ***

Safety information

  • Never leave the laser cutter unattended - Your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly.
  • Never cut PVC or chlorinated plastic - You should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut.
  • Do not try to cut metal in the laser cutter - If you wish to mark the metal, please use "Thermark Laser Engraving Spray / Paste".

Tips

Consumables