Difference between revisions of "Equipment/HPC LS3060 Laser Cutter"
Jump to navigation
Jump to search
m (→Instructions) |
(→Status) |
||
| Line 1: | Line 1: | ||
==Status== | ==Status== | ||
| − | The laser cutter | + | The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME. |
| + | |||
==Model== | ==Model== | ||
* [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter. | * [http://hpclaser.co.uk/ HPC] LS3060 "plus" laser engraver and cutter. | ||
Revision as of 10:10, 19 August 2010
Status
The laser cutter is unpacked and living near the window of the dirty room. IT IS AMAZINGLY AWESOME.
Model
- HPC LS3060 "plus" laser engraver and cutter.
Instructions
*** Please don't touch or fiddle with the laser cutter unless you've had permission from either Russ or Jonty. ***
Safety information
- Never leave the laser cutter unattended - Your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly.
- Never cut PVC or chlorinated plastic - You should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut.
- Do not try to cut metal in the laser cutter - If you wish to mark the metal, please use "Thermark Laser Engraving Spray / Paste".
Tips
- Some useful laser info from Adafruit - the settings section in particular gave a good idea of what we can expect.