Equipment/HPC LS3060 Laser Cutter/LogBook

From London Hackspace Wiki
< Equipment‎ | HPC LS3060 Laser Cutter
Revision as of 19:41, 15 September 2010 by Teabot (talk | contribs) (Created page with '==Logbook== ===15/09/2010 Operator Russ=== * Cut some 1.5mm neoprene fairly successfully - needs high power and it's a bit smelly. (Settings in the book.) * Circle …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Logbook

15/09/2010 Operator Russ

  • Cut some 1.5mm neoprene fairly successfully - needs high power and it's a bit smelly. (Settings in the book.)
  • Circle issue is fixed. It was a problem with the tension on the frontmost X drive belt.
  • Did some awesome etching onto black anodised aluminium - 450mm/sec, 90% power.

13/09/2010 Operator: samthetechie

Todo: Test CorelDraw X3 with 20mm circles on paper and compare to test using LaserCutter Software

12/09/2010 Operator: samthetechie

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Equipment/HPC_LS3060_Laser_Cutter/LogBook&oldid=4845’