Equipment/W&T Serial Com-Server Highspeed

From London Hackspace Wiki
< Equipment
Revision as of 21:58, 10 August 2011 by 86.179.211.237 (talk) (Created page with "Use: * Power device on; use menu buttons to set the IP address (or let it default to DHCP) * Use the info menu to get the IP address * For a port; configure baud rate, serial se...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Use:

  • Power device on; use menu buttons to set the IP address (or let it default to DHCP)
  • Use the info menu to get the IP address
  • For a port; configure baud rate, serial settings and mode (e.g. TCP with Port number)
  • Telnet to that IP address and port
  • and you have a one to one mapping with the serial bus.

See the manufacturers website if you want your COM1 or /dev/tty device to be mapped through (http://www.wut.de/e-58www-10-inus-000.php).

Manual is at http://www.wut.de/e-58w3w-10-inus-000.php.

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Equipment/W%26T_Serial_Com-Server_Highspeed&oldid=16871’