Latest revision as of 14:14, 29 May 2013

The IP Secure300r webcam

The camera is one of these.

The firmware is here

The java app on the main admin page of the camera tends to lockup firefox

It also listens on 49152 with some unknown protocol.

To toggle the ir leds:

wget netcam/goform/WebCam_MotoForm?MotoBut=Light --http-user=admin --http-password=hackspace

you will get a page returned as either:

webcam_logoIROff.htm (Meaning the leds are on)

or

webcam_logoIROn.htm (Meaning the leds are off)

M-JPEG returns a multipart/x-mixed-replace stream. However, the boundary provided is incorrect, which motion does not appreciate, so use:

  mkfifo campipe; nc -l -p 8011<campipe | nc netcam 80|sed -r 's/(boundary=)--sonixboundary/\1sonixboundry/'>campipe

And stream from there. On Babbage, the script netcamfix is started automatically from xinetd and does the same (this feeds into motion).

@@ Line 1: / Line 1: @@
 =The IP Secure300r webcam=
-The camera is [http://www.geniusnet.com/geniusOnline/online.portal?_nfpb=true&productPortlet_actionOverride=/portlets/productArea/category/queryPro&_windowLabel=productPortlet&productPortletproductId=1144147&_pageLabel=productPage&test=portlet-action one of these].
+The camera is [http://www.generalmanual.com/Webcams/Genius-IPCam-Secure300R-IP-Network-Camera.htm one of these].
+The firmware is [http://download.geniusnet.com/2007/webcam/IPCam%20S300R.zip here]
 =='''Warning'''==
@@ Line 10: / Line 12: @@
 * Username: admin
 * Password: hackspace
+It also listens on 49152 with some unknown protocol.
 ===Infrared led control===