Difference between revisions of "Gantry CNC"
Jump to navigation
Jump to search
Deanforbes (talk | contribs) |
Deanforbes (talk | contribs) |
||
Line 14: | Line 14: | ||
|origin=LHS Built<!-- If via pledge, please link to the completed pledge page on the wiki --> | |origin=LHS Built<!-- If via pledge, please link to the completed pledge page on the wiki --> | ||
|location=Basement,<!-- Floor, room/zone and location within that area --> | |location=Basement,<!-- Floor, room/zone and location within that area --> | ||
− | |maintainers=Robotics, Metalbashers, | + | |maintainers=CNC Team, Robotics, Metalbashers, <!-- If an individual is nominated as managing the upkeep of this item, please list them here. --> |
|template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates --> | |template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates --> | ||
}} | }} |
Revision as of 07:11, 8 September 2015
Summary
This system can cut 2d and 3d shapes from materials such as wood, plastic, metal and composites. Useful for cutting things that can't be cut in the laser cutter. We made this CNC from the UCL donated linear slides and stages, and other things lying around the space, and some bits and pieces that members had. Any suggestions for improvements / modification are welcome.
Specs
- Spindle 1000 to 20000rpm
- Rapid traverse rate at 100% 2000mm/min
- Axis travel
- X(longitudinal) 850mm
- Y(cross) 960mm
- Z(vertical) 80mm (Phase 1), 280mm (Phase 2)
Technical
The system currently runs GRBL 0.9 and is very similar to use to the Shapeoko2.
Using the system
- The spindle is currently fitted with an ER20 collet chuck and can take cutters up to 13mm diameter. Collets can be found on top of the Boxford CNC.
- To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed.