Difference between revisions of "LBL04007"
(Created page with " == Topping up the RO water level in the Autoclave == {| class="wikitable" |Author: Tolland |Approved by: S. Thompson |SOP No. LBL04007 |- |Signed: |Signed: |Effective from:...") |
|||
| Line 56: | Line 56: | ||
| − | 7.1.1 | + | 7.1.1 Obtain water from the RO tank using a Duran flask, or water carrier |
| + | <gallery> | ||
| + | File:15270736103 bcd3dccf7c c.jpg | ||
| + | </gallery> | ||
| − | |||
| − | 7.2 | + | 7.1.2 Water is added into the port on the top |
| − | + | ||
| − | + | <gallery> | |
| − | + | 15890375165_a1b657a202_c.jpg | |
| + | </gallery> | ||
| + | |||
'''8. Resources''' | '''8. Resources''' | ||
Revision as of 13:01, 29 November 2014
Topping up the RO water level in the Autoclave
| Author: Tolland | Approved by: S. Thompson | SOP No. LBL04007 |
| Signed: | Signed: | Effective from: |
| Date: | Date: | Last edited: |
1. Purpose This describes a user maintainance procedure for the Melag EuroKlav 29V-S. 2. Scope
This should be observed every time the autoclave indicates it requires a water fill top up.
3. Responsibilities
Care should be taken to not splash water when filling.
4. Materials
The autoclave requires a supply of RO water. If the water supply level falls below a minimum level, the operator will be required to top up the system. The RO water is available from the tank under the counter. The autoclave is filled into the tank from the top of the machine.
If there are any problems, please email the [mailti:hello@biohackspace.org BSO]
5. Related documents
None
6. Definitions
none
7. Procedures
7.1 Top up water level
If the water level falls below a particular level, a message will indicate that a fill is required
7.1.1 Obtain water from the RO tank using a Duran flask, or water carrier
7.1.2 Water is added into the port on the top
8. Resources
- Operating manual: http://www.eickemeyer.nl/images/products/2281/500032_Melag_Euroklav_23VS.pdf