Lulzbot Mini Flexystuder
Jump to navigation
Jump to search
| Lulzbot 2 (Crump) | |
|---|---|
 | |
| Model | Lulzbot Mini Flexystuder |
| Sub-category | CNC |
| Status | Check the Tools Status Page |
| Consumables | Ninjaflex filament |
| Accessories | Print removal knife, Pritt stick |
| Training requirement | yes |
| Training link | https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training |
| ACnode | yes |
| Owner | Hackspace |
| Origin | Donation from Lulzbot |
| Location | 3D printer area, Ground floor |
| Maintainers | tgreer, Welshie |
Crump
Crump is a Lulzbot Mini Flexystuder.
Accessible via http://crump from inside the hackspace network.
Filament
Only use the provided Ninjaflex filament.
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1