Lulzbot Mini Flexystuder
|Lulzbot 2 (Crump)|
|Model||Lulzbot Mini Flexystuder|
|Status||Good working order|
|Last updated||11 August 2019 13:44:15|
|Accessories||Print removal knife, Pritt stick|
|Origin||Donation from Lulzbot|
|Location||3D printer area, Ground floor|
|Maintainers||cptPrime (Timour), tgreer (Thomas), James N|
Only use the provided Ninjaflex filament.
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1