Difference between revisions of "Project:Alpha transceivers"

From London Hackspace Wiki
Jump to navigation Jump to search
(add a link to a possibly identical module which includes better docs!)
Line 6: Line 6:
  
 
If you get one of these, read the latest [http://www.rfsolutions.co.uk/acatalog/DS-ALPHA-TRX-6.pdf TRX documentation], as the TX and RX are slightly rearranged equivalents.
 
If you get one of these, read the latest [http://www.rfsolutions.co.uk/acatalog/DS-ALPHA-TRX-6.pdf TRX documentation], as the TX and RX are slightly rearranged equivalents.
 +
 +
== Similar device
  
 
This device appears to be the same or very similar: [http://www.skpang.co.uk/catalog/product_info.php?products_id=660], the links on that page includes a programming guide and a code library.
 
This device appears to be the same or very similar: [http://www.skpang.co.uk/catalog/product_info.php?products_id=660], the links on that page includes a programming guide and a code library.
 +
 +
: Yup, that has a smaller oscillator, but the picture in the manual shows an identical device.
  
 
== Architecture ==
 
== Architecture ==

Revision as of 09:04, 16 June 2010

Introduction

The Alpha family of radio modules are available from Maplin, codes A58JN-A63JN.

ALPHA-TX-500.jpg

The transmitters/receivers are £4 each, and transceivers are £6 each.

If you get one of these, read the latest TRX documentation, as the TX and RX are slightly rearranged equivalents.

== Similar device

This device appears to be the same or very similar: [1], the links on that page includes a programming guide and a code library.

Yup, that has a smaller oscillator, but the picture in the manual shows an identical device.

Architecture

They are single chips with an external crystal that communicate up to 300m using FSK at 433, 868 or 915MHz. They have auto tuning, RSSI, and programmable gain, channel and sensitivity.

They are controllable through SPI, and provide a clock, interrupt pins and low battery indicator for use without an Arduino.

Software

Getting the status register back (including RSSI) is easy. Getting the FIFO to work has not been achieved yet.