Difference between revisions of "Project:Biobot"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
|reqtraining=no | |reqtraining=no | ||
|acnode=no | |acnode=no | ||
| + | |location=Basement, Biohacking lab | ||
|maintainers=Tolland | |maintainers=Tolland | ||
}} | }} | ||
Revision as of 01:33, 27 April 2014
| Biobot | |
|---|---|
 | |
| Sub-category | Biohacking |
| Status | Good working order |
| Training requirement | no |
| ACnode | no |
| Location | Basement, Biohacking lab |
| Maintainers | Tolland |
BioBot is a Raspberry pi used to control and monitor our Lab-in-a-basement technology.
It's currently only equipped with a one-wire DS18B20 temperature sensor;
Updates
I've added some PID functionality to control the incubator temperature.
https://www.sparkfun.com/products/245
However I have ordered a CO2 sensor, which is currently en-route from PRC;
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190684493444
You can find it's current status by going to #london-biohackers and message the biobot like so;
15:26:24 < tolland> .incubator
15:26:24 < biobot> The temp of the incubator at 21:25:46 is 19.062 degrees C