Difference between revisions of "Project:Oyster Card Hacking"
Jump to navigation
Jump to search
(Created page with "{{Project|name=The Internet|created=20/03/2011|members=Montyphy}} == Description == Extracting the chip from an Oyster card. == Components == * Oyster card ...") |
|||
| Line 18: | Line 18: | ||
The wire for the antenna of the chip is very fine so it's easier and quicker to extract the chip without it and opt to solder on your own antenna. The contacts on the chip are quite weak so care has to be taken not to break them off. Encasing the chip something like hot glue will help prevent the antenna detaching. | The wire for the antenna of the chip is very fine so it's easier and quicker to extract the chip without it and opt to solder on your own antenna. The contacts on the chip are quite weak so care has to be taken not to break them off. Encasing the chip something like hot glue will help prevent the antenna detaching. | ||
| + | == Gallery == | ||
<gallery> | <gallery> | ||
File:Peeling_an_oyster_card.JPG|Beginning the process of peeling off the plastic layers after having submerged the card in acetone for a few hours. | File:Peeling_an_oyster_card.JPG|Beginning the process of peeling off the plastic layers after having submerged the card in acetone for a few hours. | ||
Revision as of 20:37, 2 March 2012
| The Internet | |
|---|---|
| Created | 20/03/2011 |
| Members | Montyphy |
| QR code | |
Description
Extracting the chip from an Oyster card.
Components
- Oyster card
- Acetone (commonly found in nail polish remover)
Process
- Submerge card in acetone until it softens.
- Peel off layer of plastic and submerge again.
- Repeat until chip is visible.
The wire for the antenna of the chip is very fine so it's easier and quicker to extract the chip without it and opt to solder on your own antenna. The contacts on the chip are quite weak so care has to be taken not to break them off. Encasing the chip something like hot glue will help prevent the antenna detaching.
Gallery
Beginning the process of peeling off the plastic layers after having submerged the card in acetone for a few hours.
A naked Oyster card.
A naked Oyster card in acetone to further soften it up.
Oyster card chip extracted, soldered with new antenna and encased in hot glue.
Oyster card chip extracted and ready to use.
