Difference between revisions of "Project:Sanguinololu Thermocouple"

From London Hackspace Wiki
Jump to: navigation, search
(Licence)
(Licence)
Line 36: Line 36:
 
<!-- some step by step, illustrated, instructions-->
 
<!-- some step by step, illustrated, instructions-->
 
== Licence ==
 
== Licence ==
This design is licensed under [http://creativecommons.org/licenses/by-nc-sa/3.0/ CC BY-NC-SA]
+
This design is licensed under [http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ Creative Commons BY-NC-SA]
 +
This design is modified from [http://reprap.org/wiki/Sanguinololu_SD]

Revision as of 18:54, 7 November 2012

[[|Sanguinololu Thermocouple]]
Created 03/11/2012
Version 1
Members Pinski1
Project Status Awaiting PCBs
QR code


Introduction

I wanted to add a thermocouple to my 3D printer's hot end. Ideally it would improve the quality of my printed objects as it would provide more accurate temperature readings with greater immunity from electronic noise generated by the stepper motors.

Features

The PCB I have designed has the following features:

  • Fits onto the expansion headers already present on the Sanguinololu
  • Adds a MAX31855 temperature sensing chip
  • Enables temperature readings between -750degC and +1350degC +-2degC
  • Has a resolution of 0.25degC

Files

Schematics

Eagle 5.11 file:

PCB Layout

Eagle 5.11 file:

BoM

  • MAX31855K
  • TXB0104D
  • TPS73033DBVT (any SOT-23-5 +3V3 voltage regulator)
  • 10nF 0805
  • 2.2uF 1206
  • 2x5 way female socket

Pictures

How to Build

Licence

This design is licensed under Creative Commons BY-NC-SA This design is modified from [1]