Difference between revisions of "Silvertail A0 Laser Cutter/Upgrade Notes"
Jump to navigation
Jump to search
(acnode rebuilt) |
(Do not redefine the origin) |
||
| Line 12: | Line 12: | ||
* If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it. | * If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it. | ||
* The Home is still the right rear | * The Home is still the right rear | ||
| − | * The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back. | + | * The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back. '''DO NOT REDEFINE THE ORIGIN''' - this will cause physical damage. |
* Comm port settings should be set to auto and Hackspace laser | * Comm port settings should be set to auto and Hackspace laser | ||
* Power levels might need a bit of adjustment. Do a test cut first. | * Power levels might need a bit of adjustment. Do a test cut first. | ||
Revision as of 10:48, 14 March 2020
Work-in-progress.
Differences between stock Silvertail lasercutter with Lasercut53 software and current lasercutter set-up with smoothiware controller and Lightburn software
- No need to download to the cutter
- The equivalent of 'Run Box' to get the extent of your cut is the 'Frame' button.
- Ignore the controls on the cutter itself. The LCD panel currently does nothing.
- Z axis adjustment is via software on the PC, choose a smallish step size and keep pressing the up/down z axis buttons. Little steps take it easy!
- Lightburn tutorials
- If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it.
- The Home is still the right rear
- The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back. DO NOT REDEFINE THE ORIGIN - this will cause physical damage.
- Comm port settings should be set to auto and Hackspace laser
- Power levels might need a bit of adjustment. Do a test cut first.
- ACnode has been rebuilt and re-located on the front-right of the laser cutter. Now de-powers the smoothieboard via relay.
Silvertail A0 Laser Cutter/Upgrade Notes from HPC to stock Silvertail