Page history
From London Hackspace Wiki
24 June 2015
→Adding a custom Palette to Inkscape with LaserCut colours: Shortened the link
m−38
→Pre-setting engrave/cut lines before Import to LaserCut v5.3: Edited Output from Inkscape, corrected selection choices.
m−7
Added link off to Inkscape Palette on Inkscape page
m+53
→Other files imported into Lasercut v5.3 tests: Made clearer that CS4 was used to make the DXF files.
m+46
→Other files imported into Lasercut v5.3 tests: Corrected version of Illustrator used for import tests
mUpdated the pre-engrave page and added a section describing other files importing into LaserCut.
m+1,222
Added guidance explaining how importing AI files to Inkscape can reduce setup time on the LaserCut software
m+1,536
