Anonymous

Guides/Illustrator for Laser Cutting: Difference between revisions

From London Hackspace Wiki

Guides/Illustrator for Laser Cutting (view source)

Revision as of 20:44, 24 June 2015

53 bytes added ,  24 June 2015
m
Added link off to Inkscape Palette on Inkscape page
m (→‎Other files imported into Lasercut v5.3 tests: Made clearer that CS4 was used to make the DXF files.)
m (Added link off to Inkscape Palette on Inkscape page)
Line 44: Line 44:
** Check the coloured layers and reorder them so the engraves go first and the cuts are in the correct order.
** Check the coloured layers and reorder them so the engraves go first and the cuts are in the correct order.


=== To Do ===
==== Adding a custom Palette to Inkscape with LaserCut colours ====


* Prepare an Illustrator Palette with the LaserCut colours only available
https://wiki.london.hackspace.org.uk/view/Guides/InkscapeForLaserCutting#Custom_Palette_for_making_cut_lines_appear_as_layers_in_LaserCut_v5.3
* Link to a Inkscape Palette with the LaserCut colours only available


[[Category:Guides]]
[[Category:Guides]]
Giac0m0
57

edits

Retrieved from ‘https://wiki.london.hackspace.org.uk/view/Special:MobileDiff/47340’