600mm 3-in-1 Sheetmetal Machine
Jump to navigation
Jump to search
| 3-in-1 Sheetmetal Machine (600mm) | |
|---|---|
 | |
| Model | None specified |
| Sub-category | Metalworking |
| Status | Good working order |
| Last updated | 14 December 2022 08:39:16 |
| Training requirement | no |
| ACnode | no |
| Location | Metalworking shop |
| Maintainers | Metalshop team |
A 3-in-1 sheetmetal machine which can shear, bend or roll material up to 600mm in width
Maximum thicknesses depend on the width and material. 1mm thick steel has been successfully cut and 1.5mm steel successfully bent, higher capacities are probably possible in brass or aluminium
Could also be used to shear PCB material