Good news - we're open for limited services in Wembley. Ujima House is now actively under refurbishment and we'd love your help in making the space the best it can be.

Please pay attention to the main LHS mailing list or pop into our #london-hack-space IRC channel and say hello.

During this interim period donations and continued membership are greatly appreciated while we transition to our new space.

Equipment/DesolderingGun

From London Hackspace Wiki
Jump to: navigation, search
De-soldering gun
DuratoolGun.jpg
Model Unknown
Sub-category defunct
Status Unknown
Last updated 21 January 2019 12:25:14
Consumables Unknown
Accessories Unknown
Training link Unknown
ACnode no
Owner Unknown
Origin Unknown
Location Gone, Disappeared some time around move
The desoldering gun, as seen on the Hackspace workbench

Background

This piece of equipment was bought from the this pledge.

Maintenence

When using the auto de-soldering pump please clean it BEFORE use, making sure it's cool enough to do so.

To release the filter barrel, pull down the latch at the back of the gun, similar to how you'd cock a pistol.

The barrel needs to be pulled towards the back of the gun and should come out with little force. Be very careful NOT to snap the plastic bit at the front!

If there is debris blocking the conical part of the spring, use the heat gun and melt the solder away, it should come out easily.

Filter emptying video: http://www.youtube.com/watch?v=dezW2QqewLE

Spares

Spare filters and tips were taped to the side of the machine, but don't seem to be around anymore (see below)

They are in one of the electronics drawers.

Looked like it hadn't been cleaned in quite some time. The filter was unrecognisable and the tip was pretty battered. I gave it a clean out, replaced the filter and switched out the tip.

This is where the spares live:

Desoldering gun spares.png Desoldering gun spares2.png

Buy more spares here: http://cpc.farnell.com/jsp/search/productdetail.jsp?sku=SD0138494