FeelTech FY6600 Dual Channel Function Generator

From London Hackspace Wiki
FeelTech FY6600 Function Generator
FeelTech FY6600 function generator.jpg
Model FY6600
Sub-category Test equipment
Status Good working order
Last updated 31 December 2024 19:54:16
Accessories 100MHz Probes
Training requirement no
ACnode no
Location Electronics Bench (2nd shelf)

Description

A great little function generator.

Pay attention when adjusting the frequency as the display is in kHz, not Hz!

Use the big rotary knob and the arrow keys to adjust frequency, amplitude, offset voltage, duty cycle and phase after selecting the appropriate function key on the right side of the display.

The yellow and blue keys toggle between channels 1 ands 2 respectively.

Although this device has built-in short circuit protection, please avoid shorting the output.

(Manual)

(Tutorial/Review - Skip to 1:13)

Specs

Range:

Waveform Range
Sine 0~60MHz
Square 0~25MHz
Ramp/Triangle 0~10MHz
Pulse 0~10MHz
TTL/CMOS 0~10MHz
Random 0~10MHz

Output amplitude:

≤10MHz: 1mVpp~20Vpp

10MHz-20MHz: 1mVpp~10Vpp

>20MHz: 1mVpp~5Vpp

Output Impedance: 50Ω±10%