552
edits
Project:Ethernet Arduino: Difference between revisions
From London Hackspace Wiki
→Individual interests
| Line 178: | Line 178: | ||
* '''[[User:b3cft]]:''' Would probably be after 5+ kits, SMT or through hole, don't really care too much. Happy to help/build if needed/required. | * '''[[User:b3cft]]:''' Would probably be after 5+ kits, SMT or through hole, don't really care too much. Happy to help/build if needed/required. | ||
* '''[[User:monsonite|Ken]]:''' I have now started on an EagleCAD schematic and layout for the through-hole version - see below for first draft of placement. | * '''[[User:monsonite|Ken]]:''' I have now started on an EagleCAD schematic and layout for the through-hole version - see below for first draft of placement. | ||
* '''[[User:monsonite|Ken]]:''' Update 25/3/2011 I have a batch of 10 boards now on their way. Hope to have these debugged and working next week. Plan to get batch of 100 made in China and offer bare boards for £5. Additional components are just £12. | |||
This draft is purely to show that the parts will fit onto an Arduino sized board Size 52 x 68mm, and that a route is achievable. | This draft is purely to show that the parts will fit onto an Arduino sized board Size 52 x 68mm, and that a route is achievable. | ||
Improvements will be made to the component placement and there is likely to be some change to the choice of Magjack connector - because of discussions elsewhere about PoE compatability. | Improvements will be made to the component placement and there is likely to be some change to the choice of Magjack connector - because of discussions elsewhere about PoE compatability. | ||
