120
edits
Project:USB Disco Dance Floor/v1: Difference between revisions
From London Hackspace Wiki
Added link to firmware page
(Added info about prototype construction) |
(Added link to firmware page) |
||
| Line 5: | Line 5: | ||
The aim of this project is to create a USB-controlled, Arudino-powered 70's-style disco dance floor, inspired by a [http://www.scotttorborg.com/disco-dance-floor/ similar project] by a student at MIT. It will act as a modular, low-resolution RGB display. Each pixel will be 6-8" per side, and it will come in 4x4-pixel modules that can be connected together. | The aim of this project is to create a USB-controlled, Arudino-powered 70's-style disco dance floor, inspired by a [http://www.scotttorborg.com/disco-dance-floor/ similar project] by a student at MIT. It will act as a modular, low-resolution RGB display. Each pixel will be 6-8" per side, and it will come in 4x4-pixel modules that can be connected together. | ||
The board, firmware, and software will (of course) be open-sourced. | The board, [[{{FULLPAGENAME}}/firmware|firmware]], and controller software will (of course) be open-sourced. | ||
=== Terminology === | === Terminology === | ||
