552
edits
Project:Nanode/Building a Nanode: Difference between revisions
From London Hackspace Wiki
→Step 21
| Line 162: | Line 162: | ||
==Step 21== | ==Step 21== | ||
If the voltage tests check out - we can fit the remaining parts - the Mag-jack connector, the USB connector and the Red LED | If the voltage tests check out - we can fit the remaining parts - the Mag-jack connector, the USB connector and the Red LED. | ||
The Mag-jack has 12 pins, 2 lugs and 2 prongs to insert, and can be a bit tricky. Line it up carefilly and gently push it home. Make sure all the narrow pins have been correctly inserted through their holes. | |||
Solder in place including the 2 metal prongs. | |||
A similar process for the USB B socket. | |||
The Red LED is fitted such that the long leg, the anode is inserted in the hole closest to the edge of the pcb. | |||
[[File:almost_complete.jpg|800px|center|thumb|Very nearly finished]] | [[File:almost_complete.jpg|800px|center|thumb|Very nearly finished]] | ||
==Step 22== | ==Step 22== | ||
