552
edits
Project:Nanode/Building a Nanode: Difference between revisions
From London Hackspace Wiki
→Step 22
| Line 176: | Line 176: | ||
==Step 22== | ==Step 22== | ||
The ICs can be added - making sure you have the correct orientation | The ICs can be added - making sure you have the correct position and orientation. Don't get the ATmega328 and the ENC28J60 in the wrong sockets - as that would be bad. | ||
The ATmega328 will be supplied pre-programmed with the bootloader. | |||
Remove the power (FTDI or USB) from the pcb before inserting the ICs. | |||
Some ICs will have their pins slightly splayed. This can be fixed by pressing the side of the IC firmly against the bench top until the pins are straight and parallel. | |||
[[File:nanode5_runs_blink.jpg|800px|center|thumb|Running the "Blinky" Test Code]] | [[File:nanode5_runs_blink.jpg|800px|center|thumb|Running the "Blinky" Test Code]] | ||
__NOTOC__ | __NOTOC__ | ||
