1,574
edits
Equipment/Stratasys FDM 1650: Difference between revisions
From London Hackspace Wiki
→TODO
(→TODO) |
|||
| Line 9: | Line 9: | ||
* One or more driver boards thought to be faulty, possibly requiring transistors or capacitors to be replaced. | * One or more driver boards thought to be faulty, possibly requiring transistors or capacitors to be replaced. | ||
**There is a report below that the self-test passes. Does this not include driver boards ? Does it now fail ? | **There is a report below that the self-test passes. Does this not include driver boards ? Does it now fail ? | ||
***The self-test (press both X cursor buttons while switching on) does indeed cause several movements but then hits the side of the cabinet. Therefore not completed. | |||
***Feed Home command (ACL interface) seems to do something sensible | |||
***Manual XYZ movements all operate | |||
***Homing Z tries to run substrate into extruder, was stopped. Z axis limit switch needs examining. | |||
**Document state of boards | **Document state of boards | ||
**Contact Ally to find out details of common faults | **Contact Ally to find out details of common faults | ||
