110
edits
User:Booyaa/RouterGuide: Difference between revisions
From London Hackspace Wiki
first draft, prolly lots of typos
(Created page with " == Safety mantra == * be at the centre of the machine that means you need good clearance to the left and right of you. * you want full control, if you're having to contort y...") |
(first draft, prolly lots of typos) |
||
| Line 1: | Line 1: | ||
work in progress, to be vetted by cepmenderer who gave me the safety induction. | |||
== Safety mantra == | == Safety mantra == | ||
| Line 10: | Line 11: | ||
== Setup == | == Setup == | ||
* ALWAYS unplug the router from the drill to the kill switch (it'll save you having to go back and forth to the mains) | * ALWAYS unplug the router from the drill to the kill switch (it'll save you having to go back and forth to the mains) | ||
* ALWAYS unplug socket between the router and kill switch. | * ALWAYS unplug socket between the router and kill switch. | ||
| Line 19: | Line 21: | ||
* you usually just want one quarter turn to tighten | * you usually just want one quarter turn to tighten | ||
* there's a butterfly nut next to the top left corner of the drill that adjusts the height, occasionally the vibrations when cutting will cause the drill to drop. just keep tightening till it stops. | * there's a butterfly nut next to the top left corner of the drill that adjusts the height, occasionally the vibrations when cutting will cause the drill to drop. just keep tightening till it stops. | ||
* spin the bit | * spin the bit, you want to moving smoothly and not catching on the fence. | ||
* when using this equipment everything is about control and stability. if one of the legs is wonky, make a wedge. | |||
== Routing == | == Routing == | ||
* put your googles and ear protectors on | |||
* switch the router on. never start with wood by the bit, it'll just piss the router off. | |||
* move the wood along the fence, pressing down and towards the fence. | |||
* listen to the sounds the router makes, when it doubt go slower. | |||
* if the wood stops moving, you probably got caught in one of the may guides on the routing table. lift the wood slightly. | |||
* if you're doing an edge/corner go slower on the exit, otherwise you might catch a bit of the wood at the edge and end up with a raggy edge. | |||
* practice using different drill bits and height, but always remember | |||
= ALWAYS unplug socket between the router and kill switch. = | |||
== Terminology == | |||
* bit | |||
* fence | |||
* stand | |||
* what do you call those things that save your fingers? (yellow and fit on the fence) | |||
* what do you call those things that left you cut at a 90 deg angle? | |||
