1,077
edits
Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 19:43, 2 September 2013
, 2 September 2013no edit summary
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
==Logbook== | ==Logbook== | ||
===02/09/2013 note by [[User:Solexious|Solexious]]=== | |||
Mega log! | |||
So the issue with the gantry ended up being a washer on the guide rail closest the user. This also reminds me that a couple of years ago Glen removed one of the bushings from there to find a replacement, so its only running on 2 of the 3, this could acctound for some of the play. | |||
Tube replaced with oni, now back up to full power, old tube lasted over 310 hours, wonder if we can get this one to 400? | |||
Optics seemed fine but could do with getting in a new lens. | |||
===29/07/2013 note by [[User:Solexious|Solexious]]=== | ===29/07/2013 note by [[User:Solexious|Solexious]]=== | ||
Couldn't replicate Jaspers bug, may have been due to the long axis jamming. Found running pole at the rear was bent, but fixing it didn't help (may always have been like this?). Loosening the belts fixed the problem. Gave her an oil and cleaned the gantry, it was dirty and had worked loose. Perfect alignment but still slightly under powered. | Couldn't replicate Jaspers bug, may have been due to the long axis jamming. Found running pole at the rear was bent, but fixing it didn't help (may always have been like this?). Loosening the belts fixed the problem. Gave her an oil and cleaned the gantry, it was dirty and had worked loose. Perfect alignment but still slightly under powered. | ||
