Equipment/DrillPress: Difference between revisions

Equipment/DrillPress (view source)

98 bytes removed , 20 September 2013

53

edits

@@ Line 30: / Line 30: @@
 There is a [[Drill_Press_Pledge|pledge]] running to get a new Drill Press for the space.
+The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a  "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".
-We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.
+Or you can use the Dremel and mini-mill for high speed / light duty / precision stuff.
-Or you can use the Dremel and mini-mill for high speed / light duty / precision stuff, and this one for everything else.
 Ideal jobs :