76
edits
Equipment/Stratasys FDM 1650: Difference between revisions
From London Hackspace Wiki
→TODO
m (Add pictures, update location.) |
(→TODO) |
||
| Line 71: | Line 71: | ||
*1. <s>Remove all the unnecessary wiring, including the old heater tubes.</s> 16-05-2013 | *1. <s>Remove all the unnecessary wiring, including the old heater tubes.</s> 16-05-2013 | ||
*2. <s>Identify the wiring on the steppers (these are wired differently to normal).</s> 16-05-2013 | *2. <s>Identify the wiring on the steppers (these are wired differently to normal).</s> 16-05-2013 | ||
*3. Connect the motors to the 4pi (http://wiki.arcol.hu/blog:4pi) and calibrate the settings. | *3. <s>Connect the motors to the 4pi (http://wiki.arcol.hu/blog:4pi) and calibrate the settings.</s> | ||
*4. Redesign the head end for 2 hot-ends and extruders. | *4. <s>Redesign the head end for 2 hot-ends and extruders.</s> | ||
*5. Connected hot ends and run heat and thermistor checks. | *5. <s>Connected hot ends and run heat and thermistor checks. </s> Hot ends heat fine and extrude filament. | ||
*6. Filament path checks. | *6. Head end redesign complete, waiting for aluminium part for mounting hot-ends | ||
* | *7. Filament path checks. | ||
* | *8. Install Raspberry Pi with Octoprint. | ||
* | *9. Calibration test print. | ||
*10. Heated bed design (required for ABS), phase 2. | |||
===16-05-2013=== | ===16-05-2013=== | ||
