Equipment/Vending machine: Difference between revisions

Equipment/Vending machine (view source)

291 bytes removed , 11 February 2014

3,313

edits

@@ Line 33: / Line 33: @@
 == To do ==
-*Move machine so front door can be opened
+* Create board to drive motors (24V)
-* Check motors still run
+** Include current sensing to detect position of motor
-**Motors currently connected to the original board. Needs testing with some suitable pin driving
-* Test position sensing again
-** If the initial scheme (switch breaks motor circuit) doesn't easily work, simply rewire the switches for direct sensing. It isn't worth the hassle of the original scheme to save 8 wires.
 * Replace locks (it's hard to find locks of the right shape - some have been acquired, but need bending)
 **Side lock is 30mm. A new one is ordered. I have the cam I made for the old one.