1,068
edits
Equipment/Staubli/gdmux: Difference between revisions
From London Hackspace Wiki
m
no edit summary
(Created page with "== G-code interpreter for the Staubli ==") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
== G-code | === What? === | ||
To make good use of the Staubli [[Project:Staubli_Robot_Arm|robot arm]] we need to write an g-code interpreter to allow non-programmers to use it efficiently, by utilizing off the shelf CAM software. | |||
===Challenges=== | |||
* G-code standards often have tool specific inline variations. E.g. for 3D printint there's E###, which is the rate of extrusion, whereas for CNC applications there's F### which is the spindle speed. The issues arises as the CS7 controller does the motion planning and inverse kinematics, and although the controller has GPIO they are not 5v TTL and have to be controlled with [http://www1.adept.com/main/KE/DATA/V%20Plus/V%20Language%20Reference/signal_i.html awkward V+ code]. The alternative is to intercept the gcode on a separate micro-controller and either proxy the motion only g-code to the controller or alternatively | |||
* Choose whether or not to interpolate arcs as per G03 and G02 | |||
<code> | |||
DURATION 0.5 ALWAYS | |||
FOR angle = start TO last STEP angle.step | |||
x = radius*COS(angle)+x.center | |||
y = radius*SIN(angle)+y.center | |||
MOVE TRANS(x, y, 0, 0, 180, 0) | |||
END | |||
</code> | |||
===Useful links=== | |||
* [http://linuxcnc.org/docs/2.4/html/gcode_main.html g-code refference] | |||
* List of cam [www.shapeoko.com/wiki/index.php/CAM| software] and converters from Shapeoko | |||
* [http://cambam.info/ CamBam+] - popular,customizable but non-free CAM software package | |||
