67
edits
Equipment/Stratasys FDM 1650: Difference between revisions
From London Hackspace Wiki
→TODO
(→TODO) |
(→TODO) |
||
| Line 78: | Line 78: | ||
*3. <s>Connect the motors to the 4pi (http://wiki.arcol.hu/blog:4pi) and calibrate the settings.</s> | *3. <s>Connect the motors to the 4pi (http://wiki.arcol.hu/blog:4pi) and calibrate the settings.</s> | ||
*4. <s>Redesign the head end for 2 hot-ends and extruders.</s> | *4. <s>Redesign the head end for 2 hot-ends and extruders.</s> | ||
*5. <s>Connected hot ends and run heat and thermistor checks. </s> | *5. <s>Connected hot ends and run heat and thermistor checks. </s> | ||
*6. <s>Head end redesign complete, waiting for aluminium part for mounting hot-ends<s> | *6. <s>Head end redesign complete, waiting for aluminium part for mounting hot-ends</s> | ||
*7. <s>Filament path checks.<s> | *7. <s>Filament path checks.</s> | ||
*8. Install Raspberry Pi with Octoprint. | *8. Install Raspberry Pi with Octoprint. | ||
*9. Dual head calibration test print. | *9. Dual head calibration test print. | ||
