Equipment/Ultimakers: Difference between revisions

Equipment/Ultimakers (view source)

489 bytes removed , 12 October 2015

m

no edit summary

760

edits

@@ Line 30: / Line 30: @@
 =Specification & documentation=
 ==Printing==
-*Usable Print Area: 200mm x 190mm x 100mm (7.9in x 7.5in x 3.9in)
-*Top Print Speed: 200mm/sec (7.9in/sec)
+* Print speed: 30 mm/s - 300 mm/s
-*Print Tolerance: 0.2mm (0.008in) in X and Y axes. Z axis is dependent on layer thickness
+* Travel speed: 30 mm/s - 300 mm/s
-*Layer Thickness: 0.15mm (0.0029in) to 0.35mm (0.029in)
+* Precision: 12.5 / 12.5 / 5 micron
-*Supported Materials: ABS and PLA plastic filaments
-*Usable Filament Sizes: standard 3mm (0.1in)
+* Nozzle temperature: 180 - 260 °C
+* Heated bed temperature: 50 - 100 °C
 ==Consumables==
-Only filament provided by the maintainers can be used in the Ultimakers. This is to prevent any issues with poor quality filament. If we're running low on filament (or tape), ro recommended alternative providers, let them know (via the [[mailing list]]).
+Use of filament will be covered in the training.
 Filament options (3.0mm)
 *ABS (lego brick plastic - prints at 190-230 DegC, requires heated bed at 100-110 DegC)
 *PLA (biodegradable , based on food starch - prints at 185-190 DegC, optional heated bed, not hotter than 60 DegC)
-*There are other 'specialist' filament, like wood effect, stone effect, nylon (can be coloured by clothes dye), etc