761
edits
Ultimakers-Induction: Difference between revisions
From London Hackspace Wiki
m
no edit summary
(Created page with " ==Ultimaker-2 training guide== This guide covers the skills and knowledge prerequisites for use of the Ultimaker 3d printers at the hackspace. The Ultimakers are very nice 3...") |
mNo edit summary |
||
| Line 10: | Line 10: | ||
==Getting Started== | ==Getting Started== | ||
===Bring 3mm PLA filament, and an sdcard=== | ===Bring something to print, on an sdcard, sliced with Cura=== | ||
Use of Cura is a prerequisite, so please design or download some small 3d print model, and prepare a gcode file that Cura says will take less than 20 minutes to print. There are loads of examples on Thingiverse, you might have to scale it down in order to print in 20 mins or less. | |||
===3mm PLA filament, and an sdcard=== | |||
There is currently filament available, (Blue PLA 3mm) and it’s available for use, and the cost will be 50p per metre used. However if it’s used up, you will need to provide your own. | There is currently filament available, (Blue PLA 3mm) and it’s available for use, and the cost will be 50p per metre used. However if it’s used up, you will need to provide your own. | ||
