761
edits
Ultimakers-Induction: Difference between revisions
From London Hackspace Wiki
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| Line 20: | Line 20: | ||
There is currently filament available, (Blue PLA 3mm) and it’s available for use, and the cost will be 50p per metre used. However if it’s used up, you will need to provide your own. | There is currently filament available, (Blue PLA 3mm) and it’s available for use, and the cost will be 50p per metre used. However if it’s used up, you will need to provide your own. | ||
Our Ultimaker configuration requires that gcode be provided on an sdcard. There is one in the machine at present, but I would suggest bringing your own in case it’s not there. | Our Ultimaker configuration requires that gcode be provided on an sdcard. There is one sdard in the machine at present, but I would suggest bringing your own in case it’s not there. | ||
You will need to prepare and slice your CAD model using Cura. There is no PC attached to the Ultimakers, so do this beforehand. | You will need to prepare and slice your CAD model using Cura. There is no PC attached to the Ultimakers, so do this beforehand. | ||
