Ultimakers-Induction: Difference between revisions

Ultimakers-Induction (view source)

36 bytes added , 19 October 2015

m

no edit summary

761

edits

@@ Line 2: / Line 2: @@
 ==Ultimaker-2 training guide==
-This guide covers the skill and knowledge prerequisites for the use of the Ultimaker 3d printers at the hackspace. The Ultimakers are very nice 3d printers and we would like them to stay that way. Please read through this doc, and be sure to bring a preprepared gcode file with you when attending the Ultimaker induction session.
+This guide covers the skill and knowledge prerequisites for the use of the Ultimaker 3d printers at the hackspace. The Ultimakers are very nice 3d printers and we would like them to stay that way. Please read through this doc, and be sure to bring a preprepared gcode file with you when attending the Ultimaker induction session which we will print at the induction.
 The Ultimakers are provided by [https://www.wevolver.com/ wevolver], and are being used for their [https://www.wevolver.com/wevolver.staff/robots-for-good/main/description/ Robots for good] project. Therefore they will have priority on usage of the machines. So please be prepared to be flexible in usage. If you absolutely need something printing, then consider using a commercial 3d-printing service.
@@ Line 22: / Line 22: @@
 There is some additional documentation linked to from the wiki page relating to the equipment;
 https://wiki.london.hackspace.org.uk/view/Equipment/Ultimakers
 ==Getting Started==