Equipment/Ultimakers: Difference between revisions

Equipment/Ultimakers (view source)

36 bytes added , 30 October 2015

m

no edit summary

760

edits

Revision as of 02:50, 30 October 2015 (view source) Tolland (talk \| contribs) mNo edit summary ← Older edit		Revision as of 02:50, 30 October 2015 (view source) Tolland (talk \| contribs) mNo edit summary Newer edit →
Line 5:		Line 5:


	There are 2 ultimakers currently on loan from "robots for good" project. They are available for use by members under the acnode system. Given the high cost and delicate nature of this equipment training is available to members who have previous experience with 3d print hardware, ideally will have done the lulzbot induction. However the Ultimakers are much easier to use than the lulzbot, and if you follow the basic guidelines, you should have no problems.		There are 2 ultimakers currently on loan from "robots for good" project. They are available for use by members under the acnode system. Given the high cost and delicate nature of this equipment training is available to members who have previous experience with 3d print hardware, rather than absolute beginners, ideally you will have done the lulzbot induction. However the Ultimakers are much easier to use than the lulzbot, and if you follow the basic guidelines, you should have no problems.

	Product links		Product links