40
edits
Project:APRS iGate: Difference between revisions
From London Hackspace Wiki
update after installing piGate last night
(Created the page) |
(update after installing piGate last night) |
||
| Line 3: | Line 3: | ||
Because APRS coverage sucks in London, and this is a project which is nice and easy to kick off, but has lots of scope for doing ALL THE THINGS. | Because APRS coverage sucks in London, and this is a project which is nice and easy to kick off, but has lots of scope for doing ALL THE THINGS. | ||
'''''Current status:''''' | '''''Current status:''''' Raspberry pi with rtl-sdr installed in the shack, and connected to the X50 antenna on the shack roof ([https://aprs.fi/info/a/M0HSL-10 M0HSL-10 on aprs.fi]) | ||
'''''Short term proposal:''''' An Rx only igate based on a raspberry pi and an RTL-SDR, on loan from [[user:MatStace|MatStace 2E0TPS]] until such time as it's no longer needed. Contact Mat if you need access to it for any reason. | '''''Short term proposal:''''' An Rx only igate based on a raspberry pi and an RTL-SDR, on loan from [[user:MatStace|MatStace 2E0TPS]] until such time as it's no longer needed. Contact Mat if you need access to it for any reason. | ||
| Line 11: | Line 11: | ||
* Weather/telemetry in the packets. | * Weather/telemetry in the packets. | ||
* Frequency (if there is someone operating the station) | * Frequency (if there is someone operating the station) | ||
'''''To-Do/Improvements:''''' | |||
* Add a short USB extension between Pi and RTL-SDR to remove mechanical stress | |||
* Possibly add a short N-type -> SMA pigtail between antenna cable and rtl-sdr instead of solid adapter (shouldn't need it if above is done) | |||
* See if RF filtering before rtl-sdr is necessary/beneficial - maybe broadcast FM band stop, or a VHF bandpass | |||
